The main material of EVA camera case is EVA, so it is sometimes called EVA camera case. Its hard performance is also called hard camera case, or camera hard case.

Advantages of EVA camera case compared to ordinary camera case:

1. The composition of the fabric - it is made up of fabric, EVA and lining.

The fabric selection is diverse and can be Oxford cloth, PU, hibiscus leather, etc. The base material can be velvet, mutispandex, etc. The type of EVA can also be subdivided by its thickness and hardness. Commonly used ones are 5MM, 6MM, and 7MM. The thickness The higher the value, the harder the product will be;

2. Main process - hot pressing molding

After the fabric is attached, it is cut. After heating at 40-70 degrees, put it into the heat press, and the shape will come out immediately. Of course, the corresponding molds must be prepared before this. The heating temperature is also very particular, so I won’t go into details here;

3. Printing process

There are also many types of printing supported, including general printing, silk screen printing, heat transfer printing, rust printing, etc., as well as gravure and embossing printing. This special process is because it is engraved on the mold and is molded together during molding. The effect comes out.

The camera bag made of EVA has the advantages of good cushioning, shock resistance, heat insulation, moisture resistance, chemical corrosion resistance, etc. It is also non-toxic and non-absorbent. The fabric selection is diverse, the shape is easy to shape, the appearance is fashionable and noble, the accessories can be adjusted at will, and mesh bags can be added to enhance the camera's personalized and diversified functions. The price is slightly higher than that of a cloth bag, but it can bring a high-end visual experience.